In speaking of the “texture” of a wall, we must take into consideration the kind of bricks used, their shape and size, their colour, their bond devised to give a distinctive pattern to the wall face, the mortar joints and, finally, the kind of mortar used. It need scarcely be said that the results possible with the old brick of slightly irregular shape and varied colour in English or Flemish bond--Flemish bond was exceedingly popular among eighteenth century builders--were infinitely more satisfactory than any that could be attained through the use of the later “faultily faultless” pressed brick of monotonously uniform shape and size, with a surface “like cut cheese and a colour like a firecracker” and a great deal of the charm of the old work is due to agreeable texture. While there is some exceedingly pleasing brickwork in New England and especially in the Connecticut Valley, brick excellence is much more common in the Middle States and the South where brick building was always more in vogue. Occasionally in New England, and very frequently farther south, a goodly degree of interest was achieved by the combination of different bonds, by herring-bone panels, by projecting courses on wall faces, at cornices or about chimney tops and by diaper patterns, dates and initials wrought in blue headers on end walls and in gables. Specially moulded capping bricks for base courses and for the tops of walls were used to good effect. Both field stone and local quarried stone were used in New England and masonry was usually of the rubble type although occasionally the stones were carefully squared and dressed. The same may be said of stone work in New York. Sometimes the walls were of stone with brick door and window trims, as at the Manor House at Croton-on-Hudson. In the Dutch part of northern New Jersey the native reddish brown stone was employed with excellent effect both in rubble masonry and for cut work. In both cases it was often pointed with white mortar joints which gave a peculiar and striking contrast.