In addition to coal gas made in the way just described, there is another form of illuminating gas, in the manufacture of which coal is indirectly employed. This gas, known as water gas, because it is formed by the decomposition of water, is produced by passing steam over red hot carbon, in the form of hard coal or coke. When this is done, the hydrogen in the steam is set free and the oxygen combines chemically with the carbon, to form the carbon monoxide, that was mentioned as being present, in small proportions, in ordinary coal gas. This carbon monoxide is poisonous, if much of it is breathed, and as it has no odor it is difficult to detect when escaping. A number of deaths have resulted from water gas for this reason, and in some states the laws forbid its use for lighting purposes. When water gas is used it must be enriched with some other substances before it will yield much light. You have already learned that neither hydrogen nor carbon monoxide burns with a bright flame, and you will see that water gas must have something added to it to fit it for lighting purposes. The substance usually added is the vapor of some light, volatile oil, like gasoline. This vapor is composed of compounds of carbon and hydrogen, and when it is mixed with the water gas it forms a gas that yields a very satisfactory light; and that may be produced more cheaply than common coal gas. There remains one more form of illuminating gas which has been the subject of much discussion in recent years, namely, acetylene. This is a compound of carbon and hydrogen, in which there is twelve times as much carbon as hydrogen. It has not been discovered recently, for it was known early in the nineteenth century, but its possible use for lighting purposes was not considered then. Attention was directed to it a few years ago by the discovery of a substance called calcium carbide. This is a compound of carbon and the metal calcium, formed by heating to a very high temperature a mixture of coal and lime. It has the peculiar property of decomposing, when treated with water. The calcium present combines with the oxygen and half the hydrogen of the water, to form common slacked lime or calcium hydrate, while the carbon and the remainder of the hydrogen combine to form acetylene gas. The gas formed in this way needs no purifications before burning; it can be produced in small generators, and the production can be checked at any time. When burned in the proper form of burner it yields the brightest of all gas flames. For these reasons it is adapted for use in small villages and for lighting single houses. It is also frequently used in magic lanterns, where a strong and steady light is necessary. But the cost of producing acetylene in large quantities is greater than that of coal gas, and it seems extremely unlikely that it will ever be much used for lighting large cities and towns. How the Light Gets Into the Electric Light Bulb.