In 1855, the “_The North American Patent Boot and Shoe Co._” tested gutta-percha as a cement after they had abandoned a rubber filament or cement as useless. They continued to manufacture boots and shoes by the use of gutta-percha, and found, after a long and satisfactory trial, through all seasons of the year, that it remained firm and uninjured, not being in the least affected by the oleaginous substances or fluids used in preparing the various kinds of upper leather or sole leather. The oily matter here referred to, destroys all the rubber cements, and the Company found that gutta-percha continued as firm and tenacious after their tests, as when first applied to the shoe, and was not affected by other chemical combinations used in the construction of the shoe. That Company spared no pains or expense in perfecting _part_ of the manufacture of the shoes, whereby they were enabled to produce a quality of goods never before equalled in lightness, style, or practical utility, _exceeding_, as they did, the most sanguine expectations of all interested. They fully demonstrated that shoes thus manufactured were far superior to the sewing or pegging process, or rubber cements; thus proving conclusively that the process is destined to produce an entire revolution in the manufacture of every description of fine shoes and boots. Gutta-percha cement applied to sole leather renders it water-proof just in proportion as it is mixed with its fibres, and the quantity applied; at the same time improving the leather more than one hundred per cent. as it adds to its solidity and durability. _The mixing, mingling, or saturating the fibres of the leather, or other fibrous substances, as cloth, with the cement, gives it its firm and tenacious hold_ on the various substances to which it is applied in the manufacture of boots and shoes, _and all other combinations that require a tenacious cement_. PROCESS FOR MANUFACTURING BOOTS OR SHOES BY SIMPLY CEMENTING THE EDGES OF THE IN SOLE AND OUTER SOLE. Objections are sometimes urged against the gutta-percha _sole_ as being liable to sweat the feet. This objection we regard as purely mythical, as no such result will follow _unless_ the feet are _encased_ in rubber or gutta-percha. The top of the foot being covered with leather, thus allowing the _perspiration_ to _escape_, the gutta-percha sole acts _only_ as a _protection_, thus avoiding the unpleasant effects realized in wearing India-rubber shoes. Shoes or boots may be made, if desired, by cementing the edges of the inner sole and outer sole only. This process obviates the objection just alluded to. We have manufactured shoes in this manner, which have worn at least _one-third_ longer than when pegged or sewed, the materials being the same. For _perfectly dry_ walking they are a very desirable article. Only about one-fourth the quantity of cement is required when manufactured in this manner.