The Boy's Book of Industrial InformationNoyce, Elisha
General
The Boy's Book of Industrial Information
Noyce, Elisha
Industrial arts -- Juvenile literature; Technology -- Juvenile literature
The construction of artesian wells depends upon the fact that water,
being at liberty to flow, will always sink to a level; by which it
is meant that the parts which are highest press upon those that are
lower, and tend to raise them, the higher parts sinking in the same
proportion that the lower parts are elevated; this continues until
both are upon a level. Suppose a bent glass tube of the form of fig.
1, be partly filled with water, the surfaces of the water in both
arms of the tube will each be upon a level with the other; suppose
now another such tube to have a small hole at A, the water sinking
in each arm will force out a jet of water, and if a tube be inserted
into this hole it will represent an artesian well, and the water will
rise in it till all three are on a level (fig. 2). Instead of these
tubes there is a layer of some porous material, as gravel, at some
distance beneath the surface of the earth, rising at each end and
forming a sort of basin (fig. 3), which is bounded above and below
by some impervious substance as clay or stone; the well being sunk
at any part (as at _a_, _b_, or _c_) below the level of the gravel,
where it forms the surface of the earth, must cut through the upper
stratum of clay or stone, and thus form a tube into the porous gravel
which holds the water; this water is obtained from the rain, which,
falling on the surface of the earth, drains through the gravel and
fills its lower part. The water will rise in the bore at a height
according to circumstances, if the gravel at each side of the bore
rises to higher ground, a jet of water will be forced out, if not so
high, the well will only partly fill, and so on. Artesian wells are
sunk or bored by means of instruments screwing on to the end of a set
of iron rods each screwing into the end of the other as shown in fig.
4. The first piece is generally a sort of gouge (_a_) two or three
inches wide, and so made as to bring up a cylindrical piece of earth
when forced in and screwed round, the weight of the rods after a few
pieces are added is sufficient to force the gouge into the earth,
except in stony places, when a sort of “pick” is used.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account