The Boy's Playbook of Science: Including the Various Manipulations and Arrangements of Chemical and Philosophical Apparatus Required for the Successful Performance of Scientific Experiments in Illustration of the Elementary Branches of Chemistry and Natural PhilosophyPepper, John Henry
Science
The Boy's Playbook of Science: Including the Various Manipulations and Arrangements of Chemical and Philosophical Apparatus Required for the Successful Performance of Scientific Experiments in Illustration of the Elementary Branches of Chemistry and Natural Philosophy
Pepper, John Henry
Science -- Juvenile literature
If a mixture of equal parts of oxide of manganese and chlorate of potash
is placed in a clean Florence flask, with a cork, and pewter, or glass
tube attached, great quantities of oxygen are quickly liberated, on the
application of the heat of a spirit lamp. Such a retort would cost about
fourpence, and if the flask is broken in the operation it can be easily
replaced by another, value one penny, as the same cork and tube will
generally suit a number of these cheap glass vessels. Corks may always
[Page 91] be softened by using either a proper cork squeezer, or by
placing them under a piece of board or a flat surface, and rolling and
pressing the cork till quite elastic.
Whilst fitting the latter into the neck of a flask, it is perhaps safer
to hold the thin and fragile vessel in a cloth, so that if the flask
breaks the chemical experiment may not be arrested for many days by the
severe cutting and wounding of the fingers. After the cork is fitted, it
is to be removed from the flask and bored with a cork borer. This useful
tool is sold in complete sets to suit all sizes of glass tubes, and the
pewter or glass being inserted, the flask and tube will be ready for
use, provided the tube is bent to the proper curve. This is easy enough
to perform with the pewter, but not quite so easy with the glass tube,
which must be held over the flame of a spirit lamp till soft, and then
bent very gradually to the proper curve. If a short length of the glass
tube is heated, it bends too sharply, and the convexity of the glass is
flattened, whilst the internal diameter of the tube is lessened, so that
at least three inches in length should be warmed, and the heat must not
be continued in one place only, but should be maintained in the
direction of the bend, the whole manipulation being conducted without
any hurry. (Fig. 96.)
[Illustration: Fig. 96. A. The cork squeezer. B. The cork borers. C. The
operation of bending the glass tube over the flame of the spirit-lamp.
D. The neck of the flask, with cork and tube bent and fitted complete
for use.]
Having filled a gas jar with oxygen, it may be removed from the
pneumatic trough by sliding it into a plate under the surface of the
water, and to prevent the stopper being thrust out accidentally from the
jar by the upward pressure of the gas, whilst a little compressed,
during the act of passing it into the plate, it is advisable to hold the
stopper of the jar firmly but gently, so that it cannot slip out of its
place. A number of jars of oxygen may be prepared and arranged in
plates, all of which of course must contain a little water, and enough
to cover the welt of the jar.
[Page 92]
EXPERIMENTS WITH OXYGEN GAS.
This gas was originally discovered by Priestley, in August, 1774, and
was first obtained by heating red precipitate--_i.e._, the red oxide of
mercury.
HgO = Hg + O.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account