The ceramic art of Great Britain from pre-historic times down to the present day, Volume 2 (of 2) : $b being a history of the ancient and modern pottery and porcelain works of the kingdom and of their productions of every classJewitt, Llewellynn Frederick William
History
The ceramic art of Great Britain from pre-historic times down to the present day, Volume 2 (of 2) : $b being a history of the ancient and modern pottery and porcelain works of the kingdom and of their productions of every class
Jewitt, Llewellynn Frederick William
Pottery, British -- History
Encaustic tiles were made here in the fourteenth century, and the
kiln in which they were fired, and a vast number of unfinished tiles
and fragments of tiles, were discovered in 1866. The site of the tile
works was within the old abbey walls, and was accidentally brought
to light by the boys of Repton School, who were busying themselves
in levelling a piece of land for their cricket ground. During their
work they came upon patches of a stiff red clay with fragments of
tiles; and, presently afterwards, found some regular layers of them,
face downwards. Next they came upon masses of brickwork, which, upon
careful clearing, turned out to be a kiln for the firing of the
tiles. Of this, and of the tiles found within and around it, I made
careful measurements and drawings, and some of these are shown on the
accompanying engravings.[36] The kiln, Fig. 119, consisted of two
series of arches (each series consisting of six arches alternating with
the same number of openings) over what may be termed two vaults, each 7
feet 6 inches long, by 2 feet 6 inches wide, and about 1 foot 10 inches
in height. The arches were formed of chamfered bricks or tiles, those
composing the actual arch measuring 7¼ inches in breadth at the square,
or upper end; 2¾ inches in breadth at the lower end; 7¼ inches in
length; 4½ inches in length on the square sides; 3½ on the chamfer; 1¼
inches in thickness at the upper end: and three quarters of an inch in
thickness at the lower end. The basement, four inches in thickness, was
formed of bricks or tiles. Upon this were built up, at distances of 4½
inches apart, the chamfered bricks from which the arches sprung, these
being placed broadends together and so forming an hexagon. Between
these the remainder of the wall, to a level with the top of the arches,
was formed of encaustic tiles, which being 4½ inches square exactly
fill up the width. These encaustic tiles, some hundreds in number,
were of various patterns, but evidently unfinished, being quite soft
and pliable. The floor of the vault was paved with tiles, and at the
entrance was a stone wall on either side, and against the wall-pier was
placed the curious relief tile, Fig. 120.
[Illustration: Fig. 120.]
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account