} } Sandstone. This name, _Silurian_, was first used to designate the lowest well-characterized fossiliferous rocks in England. But it is now used to embrace the whole system as it occurs elsewhere. It is well exhibited in New York, both in consequence of its great development there, and because the whole system is only slightly acted upon by disturbing forces, so that the outcropping edge of each division extends over a large surface. This system is of great thickness, amounting, in places where it is well developed, to twenty thousand feet. The Champlain division commences with a quartzose sandstone, passing gradually into limestone, which is succeeded by a very thick argillaceous deposit, the Utica slate and Hudson River group. The Ontario division in the lower part is a mass of sandstone. Above this is the Clinton group, consisting of shales and sandstones. The most important part of this group, in an economical point of view, is a fossiliferous, argillaceous iron ore, coextensive with the group in this country, and is worked to supply a large number of furnaces. The last of the division is the Niagara group, which commences with a mass of shale, and becoming at length calcareous, it terminates in a firm compact limestone. This limestone has withstood the action of denuding causes better than the shales either above or below it. It therefore presents a bold escarpment at its outcrop, and occasions waterfalls wherever streams of water cross it. The falls of Niagara are formed by this rock. The Niagara limestone, in its extension westward, becomes the lead-bearing rock of Missouri, Iowa and Wisconsin. The Helderberg division is a succession of highly fossiliferous limestones, with the intervention of only occasional beds of grits and shales. One member of the series is the Onondaga Salt group. The water obtained from this group in New York annually furnishes immense quantities of salt. The Erie division consists of a thick mass of shales and sandstones. [Illustration: Fig. 8.] [Illustration: Fig. 9.] [Illustration: Fig. 10.]