LINE-ENGRAVING. Line engraving, by which is meant cutting lines into copper, steel, or other suitable material with a burin or graver, is a very ancient art. Its employment for illustrative purposes is an outcome of the art of the metal workers--particularly the Florentine goldsmiths of the fifteenth century--who filled up the lines cut in the metal with a black enamel of silver and lead sulphides (niello) which was made by heating together a mixture of these metals with sulphur. This enamel when once in was very hard to remove, so that in order to see how their lines were progressing, the artists rubbed well into the metal, in order to fill up the lines, a sticky ink. The superfluous ink was then wiped off the general surface of the metal and a piece of paper was placed in position and pressed sufficiently hard to make it enter the depressions, which alone contained the pigment, and take up the ink. A print was thus obtained of the work and so its state was ascertained. Metal engraving is carried out in the same fashion at the present time. A flat plate of copper or steel is well polished and is worked upon with a graver or burin, so that the picture is represented by lines cut into the metal. Any line, however fine, will give an impression on printing, hence it is hardly surprising that engraving has long been a popular means of expression by artists, since force, depth and delicacy are possible of attainment. The printing is carried out in exactly the same way as by the early metal workers: the plate is covered with a thick ink which is forced well into the lines and then the superfluous ink is removed. The plate is now ready for printing; to do this, the plate is placed in the bed of a copper-plate press and over it is laid a sheet of damped paper which is covered with two or three layers of blanket. The whole is then passed under the roller which forces the paper into the incised lines, so that not only is the ink picked out, but a mould of them is taken on the paper, hence the very finest lines will give an impression. Having passed through the press the paper is carefully peeled off, and thus the print is obtained. With regard to the metal employed, copper is commonly used, since it is soft and easy to work; its softness however is, in a sense, a disadvantage, since the plate will soon wear, the finest lines being the first to go, so that a limited edition of good impressions only is possible. To overcome this difficulty, the plate may be faced with steel, by which means it is rendered very durable. Steel, although once popular, is not much used nowadays owing to its hardness and the rapidity with which it rusts. As compared with copper engravings, steel gives a somewhat harder line, whilst copper gives a soft line, but this, of course, does not mean that steel engravings are harsh; the finest work can be done on steel and of remarkable delicacy.