ETCHING. Etching is a term very loosely used; strictly speaking it consists in corroding a metal plate or a flat stone with acid, or other substance possessed of a kindred action, so that depressions are formed. A pen and ink drawing, although usually so termed, is not an etching. Briefly the method is this: a well polished copper, steel or zinc plate is covered with a substance, known as the etching ground, consisting commonly of a mixture of asphaltum, white wax and pitch, which resists the action of the acid. The ground may be laid in more than one way; the simplest, perhaps, is to dissolve the etching ground in some solvent such as chloroform, which readily volatilises, and to pour the solution on to the plate, which is tilted this way and that until the liquid is evenly distributed; the excess is poured off and what remains is allowed to dry, the plate being kept level during the process. The plate is then warmed until the ground is softened, when it is held over a smoking candle and is rapidly moved here and there so that if properly done the fine soot is evenly incorporated in the ground. When the plate is cold, the drawing may be made by cutting through the etching ground, so as to expose the underlying copper, with needles of various sizes. The work is then etched by means of dilute nitric acid. When this is satisfactorily accomplished, the ground is cleaned off, the plate well inked with copperplate ink, and the surface ink removed by coarse muslin. The plate is then gone over with fine muslin, but the ink must not be removed from the depressions; finally the damped paper is placed in position and impressions obtained by the use of the copper-plate press. Etching, although suitable, especially when natural-printed,[A] for the illustration of many scientific subjects, is but seldom employed at the present time for this purpose; the preliminary announcement of Warburg's _Die Pflanzenwelt_, however, states that some of the illustrations are etchings. [Footnote A: A plate is said to be natural-printed when all the ink is removed except from the depressions; in artificial printing some ink is allowed to remain on the flat parts. Artists frequently, after removing the superfluous ink, lightly dab the plate in order to make the pigment spread slightly beyond the actual limits of the depressions; this is known as _retroussage_.] SOFT-GROUND ETCHING. This is a somewhat rare method of reproduction nowadays; it may, however, be described briefly, for it would appear to be suitable for scientific purposes, since it should not prove a matter of great difficulty for an author who is a sufficiently skilled draughtsman to make his own plates. The polished copper plate is laid with ordinary ground to which is added lard in a quantity according to the warmth of the weather.