This oil-filled type of cable carried the telephone business safely through half a dozen years. But it was not the final type. It was preliminary only, the best that could be made at that time. Not one is in use to-day. In 1888 Theodore Vail set on foot a second series of experiments, to see if a cable could be made that was better suited as a highway for the delicate electric currents of the telephone. A young engineer named John A. Barrett, who had already made his mark as an expert, by finding a way to twist and transpose the wires, was set apart to tackle this problem. Being an economical Vermonter, Barrett went to work in a little wooden shed in the backyard of a Brooklyn foundry. In this foundry he had seen a unique machine that could be made to mould hot lead around a rope of twisted wires. This was a notable discovery. It meant TIGHT COVERINGS. It meant a victory over that most troublesome of enemies--moisture. Also, it meant that cables could henceforth be made longer, with fewer sleeves and splices, and without the oil, which had always been an unmitigated nuisance. Next, having made the cable tight, Barrett set out to produce it more cheaply and by accident stumbled upon a way to make it immensely more efficient. All wires were at that time wrapped with cotton, and his plan was to find some less costly material that would serve the same purpose. One of his workmen, a Virginian, suggested the use of paper twine, which had been used in the South during the Civil War, when cotton was scarce and expensive. Barrett at once searched the South for paper twine and found it. He bought a barrel of it from a small factory in Richmond, but after a trial it proved to be too flimsy. If such paper could be put on flat, he reasoned, it would be stronger. Just then he heard of an erratic genius who had an invention for winding paper tape on wire for the use of milliners. Paper-wound bonnet-wire! Who could imagine any connection between this and the telephone? Yet this hint was exactly what Barrett needed. He experimented until he had devised a machine that crumpled the paper around the wire, instead of winding it tightly. This was the finishing touch. For a time these paper-wound cables were soaked in oil, but in 1890 Engineer F. A. Pickernell dared to trust to the tightness of the lead sheathing, and laid a "dry core" cable, the first of the modern type, in one of the streets of Philadelphia. This cable was the event of the year. It was not only cheaper. It was the best-talking cable that had ever been harnessed to a telephone.