(6) None of these mixtures can be kept well any length of time in fluid
form, that is, dissolved in water, because it becomes slimy after a very
few days, sometimes sooner. It can be liquefied again by mixing with
water, but not without affecting its durability. Therefore the ink must
be stored dry, in which form it lasts for years without change. When
required, a small quantity, about the size of two peas, is rubbed down
in a very clean small earthen or porcelain vessel, such as a saucer.
Those mixtures that contain tallow rub the easiest. The others,
containing harder substances, require more pressure. The ink should be
spread evenly over the bottom of the vessel. Then a coffee-spoonful of
rain or other soft water is poured in, and the mixture is rubbed with
the finger till the solution is perfect. Then it is put into a small,
very clean pot of glass or porcelain and is ready for use.
(7) A great deal depends on the proper quantity of water. A good ink
must be completely dissolved, with no solid particles left. It should be
about as fluid as a good, fat milk or vegetable oil. If it is too thick,
it makes the work difficult. If it is too thin, it will not withstand
the etching fluid. A few experiments will teach the proper proportions.
Even a good ink will make poor lines if it is laid on too thinly and not
firmly enough. This, however, is due to the artist's lack of skill or to
defective pens, of which I will treat hereafter.
With this quantity of ink it is possible to work for a whole day. Thus
each day fresh ink can be mixed; and it is to be noted that the vessels
must be cleansed scrupulously that no trace of the previous day's ink be
left in them. The ink will dry during the work, and as soon as this
begins to interfere with its use, one or two drops of water will thin it
again sufficiently.
This is about all that need be said about the chemical fatty or alkaline
stone-ink in general. Particular remarks will be found in the
description of its use for particular methods.
II
HARD BORAX INK
Besides the inks described, it is well to make the following and keep it
in stock for uses whose great value will be explained later.
Shellac 4 parts
Borax 1 part
Water 16 parts
Borax and shellac must be put into a clean pot filled two thirds with
water and boiled for an hour. As the water boils away it must be
replaced. When the shellac has been mostly dissolved, the mass is
removed from the fire, cooled, and filtered through a clean cloth to
separate the undissolved portions of the shellac.
This solution can be kept for years in a tightly closed glass. To color
it, a portion is to be cooked in a copper or iron ladle till it is thick
as honey. Fine lampblack or vermilion is stirred in till the mass is
thoroughly united. Then water is added, and the composition boiled again
till it is a perfect solution. This black or red ink is first-class and
can be kept well in tightly closed glass.
III
FLUID INK
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account