Starch-paste or gum with some caustic material is easily scraped off.
IV
COLOR PRINT WITH WIPING
This process is also useful for printing papers such as cotton papers,
tapestry, etc. Almost all intaglio designs permit good printing in this
way, if a handsome color is used.
Fresh cheese, or drops of congealed milk, mixed with soap, potash,
linseed oil varnish, and the desired tint, make an excellent
composition, with which all intaglio designs, even aquatints, can be
printed handsomely if the plate is very smooth.
If the design is made well, the various colors can be laid on quite
roughly, care being taken merely that each color shall be laid only
where it is desired. Then the stone should be permitted to dry, after
which all the surplus colors can be scraped away with one manipulation,
without danger that one will mix with the other in the design.
V
OIL-PAINTING PRINT THROUGH TRANSFER
Colored impressions resembling oil paintings can be made by printing
with colors and several plates on paper grounded with oil color. But
perfect oil paintings are produced only as follows:--
Make a considerable quantity of special paper by coating unsized paper
thinly with starch-paste or glue. On this make the separate impressions
from each color plate. If the painting itself is to be produced from
these separate parts, take a canvas that has been prepared for oil
painting and lay on it a wetted impression of one of the colors, let us
say, red. Print this off under light tension of the press, and when the
paper is pulled away, it will be seen that the color has been
transferred to the canvas. Then a wet impression of another color is
laid carefully in place so that it will register exactly, and the
process is repeated, till all the colors have been transferred to the
canvas.
The transferring can be done with the hand or with any other method, as
no great power is needed, since the color transfers itself readily.
VI
STONE-PAPER
This is the name already generally adopted for a substitute invented by
me for the Solenhofen stones.
I had been trying for a long time to invent some stone-like mixture that
would be equally suitable for printing. The ordinary parchment of the
writing-tablets would do if its surface were not soluble in water. I
made considerable progress with a composition of lime and freshly
congealed milk after the mixture had aged enough so that the lime could
sate itself with oxygen. Then I made a composition of chalk, gypsum, and
glue, which I dipped into a solution of nutgall and alum, and I was able
to use this for coarser work, at least, if not too many impressions were
required.
I did not get a wholly satisfactory idea, however, until I observed that
fat spots that were caused on a stone by oil, and also designs that had
been transferred to the stone with mere oil color, refused to take color
after a few weeks if they were prepared in only the slightest degree.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account