Boxes; Children's literature; Handicraft; Paper work; Toys
Place two shoe-box covers end to end upon the floor or table, for you
can put the building upon them now. See, it is placed far back, so that
there will be a platform in front. Place the building at the left of the
platform made of the shoe-box covers.
The third shoe-box cover is the roof of the station building, and you
must fit it down over the station. If you wish to have a roof over your
station platform, you will need the fourth shoe-box cover to make this.
To secure it in place, just cut two end corners on the box rim as far as
the top of the cover. Then, turn this end rim upward and slip it under
the right-hand rim of the cover which forms the roof of the station
building itself. You will need two pillars at the right-hand end of your
platform to keep the long roof up. These pillars are long lead-pencils.
Press the point of a pencil down through each right-hand top corner of
the long station platform’s top, and secure the points below by running
them into standards made of spools. The pencil point will be firm when
run into the upper hole of a standing spool, and when both pillars are
so fixed, the roof will be quite firm. (See Diagram Three, _G_, page
172.)
Next, make a signboard for your station, and glue it to the roof.
You will need to have a bench or two and a ticket office in your station
building. A little doll can be placed in the ticket office. If you look
at the picture of my Boxville Station, you will see a lady buying her
ticket of the ticket agent.
The ticket booth is the lower half of a box that is about four inches
wide and an inch or so deep. You will need to stand it on its rim and
cut a window in the part of the box that is the front of the ticket
office. You do this just as you cut the window for your station, only
you must make the ticket-booth window smaller. Draw the outline of the
window first with help of pencil and ruler. Then cut it out. To cut
window, see Diagram One, _A_, page 166.) When window is cut, paste some
waxed paper over the window opening on the inside of the box. Cut a
round opening in this, near the bottom. The ticket agent will need this,
you see. Now, the ticket booth is finished! Place it between the doors
where it should go.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account