A new kind of mashing-tub (fig. 4.) has been invented, which has a false bottom pierced with holes, through which the wort filters, instead of being drawn off by the spigot; and, by an improvement on this, the hot water is poured through a tube into the part of the mashing-tub which is below the false bottom, and suffered to rise up through the malt. When ale and beer are to be made, the ale wort is drawn off first, and then more water is heated to 175° and put to the malt, to make the beer; but when all the liquor drawn from the malt is mixed together, it is called in some places "table ale," and in others "one-way beer." [Illustration: Fig. 4. _Mash-tub_.] While the malt is being mashed, the proper quantity of hops should be steeped in water, having been first well rubbed and separated; and when the wort is drawn off they should be added to it, and the whole put into the copper to be boiled. During the boiling the mass should be frequently stirred, to prevent the hops from either floating at the top or settling to the bottom, which they would otherwise be very apt to do. The boiling should continue briskly till the liquor begins to break, the time for which varies from half an hour to two hours and a half, according to the strength of the wort. The "breaking" is known by large fleecy flakes which appear to float in the liquor; and, when it appears, a bowlful of the liquor is taken out and set aside, when, if the flakes part and subside, leaving the wort clear, it is considered enough. Some large shallow vessels called coolers are then provided, and some sticks being laid across one of them, a sieve or wicker basket is set upon them, and the liquor is ladled out of the furnace into the sieve, to strain it from the hops. The other coolers are afterwards filled in the same manner, and then the whole are exposed to a cool current of air, in order that the liquor may cool as rapidly as possible.