=Brick clays= are those which are not suitable--either from nature or situation--for the manufacture of pottery or porcelain and yet possess sufficient plasticity to enable them to be made into bricks. The term is used somewhat loosely, and geologists not infrequently apply it to clays which are quite unsuitable for brickmaking on account of excessive shrinkage and the absence of any suitable non-plastic medium. Large portions of the 'London clay' are of this nature and can only be regarded as of use to brick- and roofing-tile-manufacturers when the associated Bagshot sands are readily accessible. Similarly, some of the very tough surface clays of the Northern and Midland counties are equally valueless, though designated 'brick clays' in numerous geological and other reports. It is, therefore, necessary to remember that, as ordinarily used, the term 'brick clay' merely indicates a material which appears at first sight to be suitable for brickmaking, but that more detailed investigations are necessary before it can be ascertained whether a material so designated is actually suitable for the purpose. It is also important to observe that local industrial conditions may be such that a valuable clay may be used for brickmaking because there is a demand for bricks, but not for the other articles for which the clay is equally suitable. For instance, a considerable number of houses in Northumberland and Durham were built of firebricks at a time when it was more profitable to sell these articles for domestic buildings than for furnaces. In many ways the bricks used for internal structural work form the simplest and most easily manufactured of all articles made from clay. The colour of the finished product is of minor importance and so long as a brick of reasonably accurate shape and of sufficient strength is produced at a cheap rate, little else is expected. Impurities--unless in excessively large proportions--are of small importance and, indeed, sand may almost be considered an essential constituent of a material to be used for making ordinary bricks. It is, therefore, possible to utilize for this purpose some materials containing so little 'clay' as to make them scarcely fit to be included in this term. So long as the adventitious materials consist chiefly of silica and chalk and the mixture is sufficiently plastic to make strong bricks, it may be used satisfactorily in spite of its low content of clay, but if the so-called 'brick clay' contains limestone, either in large grains or nodules, it will be liable to burst the bricks or to produce unsightly 'blow-holes' on their surfaces. If too much sand or other non-plastic material is present, the resulting bricks will be too weak to be satisfactory. No brick clay can be regarded as 'safe' if it contains nodules of limestone--unless these can be removed during the preparation of the material--or if the resulting bricks will not show a crushing strength of at least 85 tons per square foot.