The New England Magazine Volume 1, No. 3, March, 1886: Bay State Monthly Volume 4, No. 3, March, 1886 — John Shaqi
The New England Magazine Volume 1, No. 3, March, 1886: Bay State Monthly Volume 4, No. 3, March, 1886Various
History
The New England Magazine Volume 1, No. 3, March, 1886: Bay State Monthly Volume 4, No. 3, March, 1886
Various
New England -- Periodicals
Not thus lavishly is this nectar of the gods poured out on our New
England hills; but slowly, filtered through the closely wrought fibres
of the _acer saccharinum_, absorbing new sweetness, and gaining a more
delicate flavor at each step of its progress, until at last it falls
drop by drop into the bucket. This is rarely filled in less than
twenty-four hours, while three or four bucketfuls is an average yield
for a season, and six a large one.
[Illustration: BOILING DOWN.]
Next the sugar-house is put in order, the arch is mended, the kettle or
pan washed out, and all necessary preparations are made for boiling. The
earliest method of boiling sap of which I have any recollection was in a
huge caldron kettle suspended from a heavy pole, which was supported at
each end by the limb of a tree or on top of a post. Then a huge log was
rolled up to each side of the kettle, and the fire was built between
them. This was known simply as the "boiling-place," and could be changed
as often as convenient. The kettle which contained the sap was also open
for the reception of the dust, and smoke, and falling leaves, and forms
of dirt innumerable.
The first advance on this primitive method was made by building a rough
arch of stone around the kettle to retain the heat and economize fuel.
Next a rectangular pan of sheet-iron was substituted for the kettle, and
a shed or rude house was built around the arch. The process of
improvement has continued, until to-day in most of the larger orchards
can be found neat and convenient sugar-houses, with closely-built arches
of brick; while in place of the ancient caldron kettle, or the still
much-used sap-pan, it is common to find the modern evaporator.
There are several patterns of evaporators in use. The most common one
consists of a pan of from twelve to sixteen feet in length and four or
five in width, divided into compartments by a series of partitions which
run nearly across the pan, at intervals of six or eight inches, but at
alternate ends stop three or four inches short of the side. Thus all the
compartments are connected with each other in such a manner as to form
one winding passage-way.
Back of the arch, and at one corner, stands a large hogshead containing
sap, with a faucet at the bottom, and a small tube opening into the rear
compartment of the evaporator. This tube has a self-acting valve, which
closes when the sap has reached the proper height in the pan, and opens
again when it has been lowered by boiling.
When the sap is first turned on it at once runs through the entire
passage-way, and covers the bottom of the pan. Thenceforward it enters
slowly, and is heated gradually in the rear compartments, while the
boiling is confined to the front portion of the pan.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account