_Covering the Vines._--Instead of tying over, many vineyardists now cover the vines, and place the covers on the open center of the vine, in order that they may protect the grapes from exposure to the sun. This is done in June, several days before the hot spell is expected. The last week in June is the best time almost everywhere in California, as the vines are then open in the center, and any unusually hot weather would easily cause the grapes to sunburn. The process of covering is very simple. With a pair of shears the longest branches are clipped off and immediately placed on the open center. This is generally enough to prevent the exposed grapes in the center of the vine from being scalded. More than half a dozen branches will seldom be required, and at picking time these dry branches must first be thrown off, so as to give the picker access to the grapes. The covering of the vines is a better process than tying over, requiring less work and being more quickly performed. It is especially useful for old vines, as the grapes of young vines are principally exposed from the sides. _Thinning the Crop._--The proper thinning of the crop should be done by pruning. If the proper amount of wood is left, no thinning out of the grapes is needed. If a few show-grapes or extra large raisins are needed for exhibiting purposes, they can be produced by a judicious cutting of the majority of the grapes from any single bunch. If the free half of the bunch is cut off, the part that is left will produce very large grapes. This operation is, however, never likely to enter as a regular vineyard operation in our vineyards, as with us labor is too scarce. The object of our raisin industry is to produce cheap medium-sized raisins of good quality, to be used by the masses of the people, instead of a smaller quantity of very large grapes, which could only be used by the rich.