Element. Equivalent. Atomic Weight. Lanthanum 46 92 Cerium 46 92 Didymium 48 96 Yttrium 31 62 Erbium 56 112 the values for terbium being uncertain. If cerium be considered trivalent in the cerous salts, its atomic weight becomes 138, that of barium being 136. Mendelejeff placed cerium in Group IV, series 8, in the position which it still occupies; he pointed out that the accepted equivalent must be too low, and suggested that the atomic weight should be at least 140, almost exactly the value accepted to-day. This choice left the positions in Group III, series 8, horizontally before cerium, and in Group IV, series 10, vertically below it (see figure), to be filled by the two elements, lanthanum and didymium. No chemical evidence being available to decide the choice, he provisionally assigned didymium to the first (Group III, series 8), and lanthanum to the second (Group IV, series 10) position, at the same time expressing the opinion that didymium was probably a mixture of closely related elements. Yttrium then fell into place in Group III, series 6, above didymium, and erbium in Group III, series 10, below it. To the vacant space above yttrium in Group III, series 4, he assigned the hypothetical element Eka-boron, with atomic weight 44; this space is now occupied by scandium, which corresponds almost exactly in properties to the metal described by the Russian chemist. A part of the table illustrating these positions is shown in Fig. 4. The determination of the specific heats of the metals by Hillebrand and Norton in 1875, whilst confirming the trivalency of the elements, rendered it necessary to alter the position of lanthanum, which was placed in Group III, series 8, instead of didymium, which was thus left without a place. This first indication that all the rare earth elements could not be fitted into the table without difficulties was soon followed by the discovery of several other members of the group, for which places could not easily be found. [Illustration: