When the screen has finished its work, the water carrying the pulp in solution flows in an even stream, whose volume varies according to the width of the web of paper to be produced, through a discharge-cock onto the Fourdrinier or cylinder machine, as the case may be, each of which will be duly described. This stream has a filmy appearance, and is of diverse color, depending upon the shade of paper to be produced. From its consistency, which is about that of milk, it is difficult to imagine that it floats separate particles of fiber in such quantities as, when gathered on the wire cloth and passed to a felt blanket and then pressed between rollers, to form in a second of time a broad web of embryo paper sufficiently strong and firm to take definite form. Man’s mastery of the process by which this startling and wonderful change is effected has come as one of the rewards of his long and patient study. The Fourdrinier machine, which preserves at least the name of the enterprising developers of the invention, takes up the work that was formerly done by the molder. The wire cloth upon which the fibers are discharged as described is an endless belt, the full width of the paper machine. Upon this the fibers spread out evenly, being aided by a fan-shaped rubber or oil cloth, which delivers the smooth stream under a gate regulated to insure perfect evenness and to fix uniformly the fibers of the web now commencing its final formation. ♦Deckel-straps♦ Deckel-straps of india-rubber are fastened on both sides of the wire screen, and move with it, thus holding the watery pulp in place. The deckel-straps are adjustable, and fix or regulate the width of the paper. These and the gate, or “slicer,” are attached to what is termed the deckel-frame, which corresponds to the deckel used by paper-makers in the days when the manufacture was carried on by hand. ♦Endless wire cloth♦ As the stream flows onto the endless belt of wire cloth, the water which has borne the fibers filters into the trough beneath. Being charged with very fine fibers, size, coloring matter, and other similar ingredients, it is carried back into the pulp-chest, to save these materials, as well as to contribute again to the extra supply of water needed. ♦The save-all♦ For this reason the trough into which it falls from the revolving “wire” is called the “save-all.” A shaking motion is imparted to the “wire” from the frame upon which rest the rolls that keep it in its never-ending round. This aids in draining away the water, and mats or interlaces the fibers together. At the end of the “save-all,” where the fibers are to leave the “wire” for the next stage of their journey, suction-boxes are placed, provided with an air-pump to take up the surplus water that has not yet found its way through the meshes. ♦The dandy roll♦ Between these suction-boxes above the wire is a wire-covered roll, which impresses the newly formed sheet; this impression cylinder is called a