“On the spot which I intended each of the smaller casks to occupy respectively during the inflation of the balloon, I privately dug a hole two feet deep; the holes forming in this manner a circle twenty-five feet in diameter. In the centre of this circle, being the station designed for the large cask, I also dug a hole three feet in depth. In each of the five smaller holes, I deposited a canister containing fifty pounds, and in the larger one a keg holding one hundred and fifty pounds, of cannon powder. These—the keg and canisters—I connected in a proper manner with covered trains; and having let into one of the canisters the end of about four feet of slow match, I covered up the hole, and placed the cask over it, leaving the other end of the match protruding about an inch, and barely visible beyond the cask. I then filled up the remaining holes, and placed the barrels over them in their destined situation. “Besides the articles above enumerated, I conveyed to the depot, and there secreted, one of M. Grimm’s improvements upon the apparatus for condensation of the atmospheric air. I found this machine, however, to require considerable alteration before it could be adapted to the purposes to which I intended making it applicable. But, with severe labor and unremitting perseverance, I at length met with entire success in all my preparations. My balloon was soon completed. It would contain more than forty thousand cubic feet of gas; would take me up easily, I calculated, with all my implements, and, if I managed rightly, with one hundred and seventy-five pounds of ballast into the bargain. It had received three coats of varnish, and I found the cambric muslin to answer all the purposes of silk itself, quite as strong and a good deal less expensive.