The condenser had 420 tubes 1-1/2 in. in diameter, giving a cooling surface of 1375 square feet. The tubes were arranged in three nests, the water circulating through the top one first and the bottom one last. The circulating pump, instead of forcing water through the tubes, as was usual in such case, sucked from the condenser and discharged directly overboard. There were: one air pump, 24 in. in diameter; one circulating pump, 24 in. in diameter; two feed pumps, 4-3/4 in. in diameter; and one bilge pump 7 in. in diameter: all the pumps were single-acting, with 17 in. stroke. The diameters of the principal pipes were: main steam, 7-1/2 in.; to low-pressure cylinder, 12 in.; circulating inlet, 10 in.; discharge, 12 in.; air-pump discharge, 10 in.; main feed, 3-3/4 in.; and waste steam, two at 6 in. in diameter. The two boilers were double-ended, of the locomotive type, with wet-bottomed furnaces. The centre was cylindrical, but the ends were rectangular with semi-cylindrical tops, the total weight, without water, being 78 tons. Each boiler had a long receiver passing through the uptake to dry the steam. On the receiver was a deadweight safety-valve 6-1/4 in. in diameter, to suit a working pressure of 60 lb. per square inch. The grate surface was 112 square feet, and the total heating surface 4506 square feet, there being 328 iron tubes 4 in. in diameter. [Illustration: Plate XII. GENERAL ARRANGEMENT OF THE MACHINERY OF THE "ACHILLES."] The three pioneer ships of the Holt line--the _Agamemnon_, _Ajax_, and _Achilles_--proved most economical. The _Achilles_ came home from China in fifty-seven days eighteen hours, net steaming time, or, including the stoppages at ports, sixty-one days three hours. She travelled during this period a distance of 12,352 miles, on a consumption of coal which did not exceed 20 tons per day for all purposes,[48] equal to 2-1/4 lb. per unit of power per hour, which for those early days, with comparatively low steam pressures, must be regarded as a highly satisfactory result. The non-stop voyage between Liverpool and Mauritius was made as early as 1866 in thirty-seven days, equal to 10 knots, with a number of passengers and a fair cargo. The higher economy established for the compound engine on long voyages resulted in the ultimate supersession of the sailing ship.[49] Thus the Scotts, while still enjoying the credit of the splendid performance of the _Lord of the Isles_ in the early 'sixties, produced at their foundry the Holt compound engine, which sounded the death-knell of the clipper. The compound system had at once an influence on the size of ships. Up till 1862 no ship of over 4000 tons had been constructed, with the exception of the _Great Eastern_; by 1870 there were fifteen; by 1880, thirty-seven.[50]