Two Centuries of Shipbuilding by the Scotts at GreenockScotts' Shipbuilding & Engineering Co. Ltd.
History
Two Centuries of Shipbuilding by the Scotts at Greenock
Scotts' Shipbuilding & Engineering Co. Ltd.
Scotts' Shipbuilding & Engineering Co. Ltd.; Shipbuilding -- Great Britain
Attention was further directed to the improvement of explosives;
and ultimately, instead of gunpowder having a potential energy of
480 foot-tons per pound, modified gun-cotton was introduced, with
an energy of 716 foot-tons per pound, and still later there were
evolved explosive compounds of which the potential energy per unit of
weight was fourfold greater than in the case of gunpowder, namely,
1139 foot-tons per pound. Finally, the explosive has taken the
form of cordite, which ensures slow burning, great expansion, and,
consequently, augmented propelling power behind the projectile, without
material addition to the maximum strain upon the weapon. But in any
case the constructional strength of the modern gun is enormously
superior to the earlier built-up weapons, as around the inner tubes
there is coiled something like 120 miles of wire, which itself has a
breaking-strain of between 90 and 110 tons per square inch, and is
put on under a tension of from 54 tons per square inch on the inner
wires to 32 tons per square inch on the outer wires,[63] so that the
ultimate resistance to strain consequent upon the firing of the gun
is enormously increased. Velocities of 2600 ft. per second are thus
realised, and even more is quite feasible, so that penetration of
wrought iron at 1000 yards range has now been increased to 42 in.
If we compare the 12-in. gun to-day with the weapon of the same
calibre of twenty years ago, when there was no widened chamber for
the explosive, when prismatic powder of low expansive power was used,
it is found, as shown in the Table opposite, that the penetration
at 1000 yards has been doubled, and the possible effective range
multiplied fivefold. There has also been an enormous gain in quicker
fire by improved breech mechanism and efficient hydraulic and electric
mountings, whereby the gun and all its loading, elevating, and training
machinery is rotated.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account