For the British Isles the mean sea-level at Liverpool has been selected by the Ordnance Survey as their datum, and the height of any station may be ascertained by first noting the nearest Ordnance Bench Mark thus ↑, and purchasing that portion of the Ordnance map which includes the station, near to which the Bench Mark will be found with the height above sea-level duly entered. The levellings made for railways will also furnish the desired information. Failing both these, the observer should select two or more of the stations nearest his locality for which official Meteorological Reports are published daily in the _Times_ and other journals; and taking observations of his barometer at 8 a.m., for a few weeks, should compare them with the mean of the observations at those stations. The comparison should be omitted when the barometer pressure is not steady. [Illustration: 24. Error of Capillarity. Scale about 1/2.] [Illustration: 25. Standard Barometer. Scale about 1/7.] A Standard Barometer is constructed on FORTIN’S principle, and should have its tube about half an inch bore, enclosed in a brass body having at its upper end two vertical openings, in which the vernier works. The mercury is seen through these openings, aided by light reflected from a white opaque glass reflector let into the mahogany board behind. The scale is divided on one side into English inches and 20ths, and may have on the other French millimetres, the vernier enabling a reading to be taken, in each case respectively, of 1/500th of an inch and 1/10th of a millimetre. In making the instrument, the mercury is boiled in the tube, to ensure the complete exclusion of air and moisture; while FORTIN’S principle of cistern ensures a constant level from whence to take the readings. A sensitive thermometer with scale, engine-divided on stem, is attached to the brass mount, which is perforated to admit the attenuated bulb of the thermometer into absolute contact with the glass tube of the barometer, to ensure its indicating the same temperature as the contained mercury. The instrument is suspended by a ring from a brass bracket attached to a mahogany board, and the lower end passes through a larger ring having three screws for adjusting it vertically. A “reading” is taken in the following manner:—1. Note the temperature by the attached thermometer. 2. Raise or lower the mercury in the cistern by turning the screw underneath until the reflected image of the ivory point on the mercury _seems_ to be in contact with the ivory itself. By the milled head at the side, the vernier is adjusted until its lower edge just touches the top of the mercurial column, the scale and vernier then indicate the height of the barometer in inches, 10ths, 100ths, and 1000ths.