Webster's practical forestry : $b A popular handbook on the rearing and growth of trees for profit or ornamentWebster, Angus D.
Science
Webster's practical forestry : $b A popular handbook on the rearing and growth of trees for profit or ornament
Webster, Angus D.
Forests and forestry -- Great Britain; Trees -- Great Britain
From 4 ft. to 5 ft. is the usual height, the foundations being from 22
in. to 24 in. wide, and the wall 14 in. across beneath the cope-stone,
the latter being about 10 in. high and placed on edge. Great care is
necessary in building to see that the “throughs” or binding-stones are
placed in position, as on this depends mainly the efficiency of the
fence. Where wires are used atop, the wall need only be 3 ft. high,
22 in. wide at base, and 12 in. under the cope-stone. The latter are
bedded in mortar, and an extra large stone is placed every 6 ft. for
receiving the iron standard, to which the wires are attached. Slate
slabs, where these are readily procured, may be used for the same
purpose as the iron standards, but they should be built firmly into the
wall, and reach from the base of the foundation. Two, and sometimes
three, wires are used atop of the wall.
=Slate Fences.=—These are commonly in use throughout Wales; in fact,
wherever slate quarries are worked. When well erected and of fairly
regular sized slates, this fence is certainly not to be despised,
and it may be considered as practically indestructible. The expenses
incurred for keeping these fences in repair are also very little, as
they seldom become damaged, and when an upright chances to get broken,
another whole one can easily be substituted, and without interfering
with any other portion of the fence. The size of slate pale, or slab,
as usually termed, is 5 ft. long, 4 in. to 6 in. wide, and about 1 in.
in thickness. In erecting the fence a trench is cut about 12 in. wide
and 8 in. deep, care being taken that the trench is cut perpendicular,
so as to ensure the pales standing in a similar position. These are
placed upright in the trench, about 3 in. apart, with their flat side
close to the perpendicular cut and the soil replaced in the trench and
made firm with a rammer.
A double wire is then tightly interlaced about 3 in. from the top of
the pales, and given a double twist between each, thereby ensuring
great stability by uniting the fence and keeping the pales at equal
distance apart. The straining-posts are also of slate, 6 ft. long, 6
in. wide, and 3 in. thick.
[Illustration: SLATE FENCES]
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account