Harvest time comes well on in the summer, and for several weeks everyone is busy on the farm. It is usual when putting in a wheat crop to sow a portion for hay. Either a separate crop is sown or a special variety suitable for hay is sown around the main grain crop. This is cut with the reaper and binder just after the wheat plant has flowered. The sheaves, which are tied by the machine, are stooked in the paddock for ten or fourteen days until dry enough to be carted in and stacked. The climate--as a rule fine weather prevails--is favourable to haymaking, and a bright-coloured nutritious hay is produced. The average yield is a ton to one ton and a-half to the acre, but three, four, and even five ton crops are taken off, but that is usually in a crop sown and cultivated specially for hay with the intention of supplying the chaff market, which is an industry in itself. The wheatfarmer, properly speaking, only cuts what he will require for his own horses. A reaper and binder is drawn by three horses, and will cut from 10 to 12 acres per day. One man is required to drive the machine, and one or two men to pick up and stook the sheaves. Some farmers cut their own hay for chaff, working the machine either by hand or with horse-works for turning the cutting wheel, but the majority have the hay cut by contractors, who travel through the country with a special plant for the purpose, charging $2.16 per ton for cutting. After a portion round the edges of the crops has been cut for hay a strip of land is ploughed around the crop in the stubble for the purpose of making a break in case of fire, and thus enabling a fire that might approach the crop being controlled on the bare ploughed ground. [Illustration: CARTING WHEAT TO RAILWAY STATION.]