Hardware, estimating, and mill design — John Stuart Mill — John Shaqi
Hardware, estimating, and mill design
John Stuart Mill · en
TIN REGISTER BOXES
_Quantities and Cost_
Three 14" × 16" × 4", at 80 cents $ 2.40
One 7" × 10" × 4" .57
Two 10" × 12" × 4", at 75 cents 1.50
Two 15" × 12" × 4", at 75 cents 1.50
Two 7" × 9" × 4", at 57 cents 1.14
Labor, one-third of cost of materials 2.37
------
Total $ 9.48
MISCELLANEOUS
_Quantities and Cost_
Fifteen elbows, 10 in. in diameter, at 35 cents $ 5.25
Two elbows, 8 in. in diameter, at 25 cents .50
Ten sheets of "IC" tin, 20" × 28", at 20 cents 2.00
Two cold-air boxes, each 24 ft. long, of 20-inch
earthen pipe, with two slide dampers and screens 38.40
Labor: one-third of cost of materials 15.38
------
Total $61.53
_Summary_
Furnace $125.00
Warm-air and smoke pipes 32.88
Registers and borders 31.16
Register boxes 9.48
Miscellaneous 61.53
-------
Total cost of heating and ventilating system $260.05
PLUMBING
=11.= A complete list of the plumbing fixtures, together with the
sizes, lengths, and materials of all pipes, should be tabulated so
that any item can be easily referred to in case of alteration in the
schedule.