Sections of all organs were fixed as soon as possible in either Zenker’s or Helly’s fluid. Hematoxylin and eosin were used as routine tissue stains. Eosin and methylene blue, and Mallory’s connective tissue stain were, however, frequently utilized for special staining reactions. The motility of the spermatozoa is best observed about half an hour after ejaculation, when the thick tenacious clot has started to liquefy. A drop of the fluid is placed upon a warmed slide, preferably one with a slight depression in it, and observation made with high or low powered objectives. The semen may be examined whole, or diluted with physiological saline solution. In the latter case, the sperms have a greater opportunity for freedom of motion in the absence of the thick viscid coagulate. A small vial of saline solution may be carried in one’s pocket where it will be kept warm, and a drop of this placed upon the glass slide. If the clot of semen is merely touched to this drop on the slide, plenty of spermatozoa will be deposited for an examination. This method is very satisfactory for the observation of motility, but needless to say, the undiluted semen must be used for the determination of the number of sperms present. If necessary, the specimen may be covered with a cover glass and the oil immersion objective used. While a warmed slide is quite sufficient to enable one to detect the presence of motility, the field soon cools and the sperms gradually become less motile. If possible, it is best to use a small electrically heated stage warmer, which keeps the field at a constant body temperature, so that the duration of the motion may be observed for hours if warmed physiological saline solution is added as the fluid evaporates.