Acetylene, the Principles of Its Generation and Use: A Practical Handbook on the Production, Purification, and Subsequent Treatment of Acetylene for the Development of Light, Heat, and PowerLeeds, F. H. (Frank Henley)
Science
Acetylene, the Principles of Its Generation and Use: A Practical Handbook on the Production, Purification, and Subsequent Treatment of Acetylene for the Development of Light, Heat, and Power
Leeds, F. H. (Frank Henley)
Acetylene
The British Acetylene Association's regulations relating to carbide of
calcium (_vide_ Chap. XIV.) contain a clause to the effect that
"carbide which, when properly decomposed, yields acetylene containing
from all phosphorus compounds therein more than 0.05 per cent, by volume
of phosphoretted hydrogen, may be refused by the buyer." This limit is
equivalent to 0.74 milligramme of phosphorus calculated as PH_3 per
litre. A latitude of 0.01 per cent, is, however, allowed for the
analysis, so that the ultimate limit on which carbide could be rejected
is: 0.06 volume per cent. of PH_3, or 0.89 milligramme of phosphorus per
litre.
The existence in appreciable quantity of combined silicon as a normal
impurity in acetylene seems still open to doubt. Calcium carbide
frequently contains notable quantities of iron and other silicides; but
although these bodies are decomposed by acids, yielding hydrogen
silicide, or siliciuretted hydrogen, they are not attacked by plain
water. Nevertheless Wolff and Gerard have found hydrogen silicide in
crude acetylene, and Lewes looks upon it as a common impurity in small
amounts. When it occurs, it is probably derived, as Vigouroux has
suggested, from "alloys" of silicon with calcium, magnesium, and
aluminium in the carbide. The metallic constituents of these substances
would naturally be attacked by water, evolving hydrogen; and the
hydrogen, in its nascent state, would probably unite with the liberated
silicon to form hydrogen silicide. Many authorities, including Keppeler,
have virtually denied that silicon compounds exist in crude acetylene,
while the proportion 0.01 per cent. has been given by other writers as
the maximum. Caro, however, has stated that the crude gas almost
invariably contains silicon, sometimes in very small quantities, but
often up to the limit of 0.8 per cent.; the failure of previous
investigators to discover it being due to faulty analytical methods. Caro
has seen one specimen of (bad) carbide which gave a spontaneously
inflammable gas although it contained only traces of phosphine; its
inflammability being caused by 2.1 per cent. of hydrogen silicide.
Practically speaking, all the foregoing remarks made about phosphine
apply equally to hydrogen silicide: it burns to solid silicon oxide
(silica) at the burners, is insoluble in water, and is spontaneously
inflammable when alone or only slightly diluted, but never occurs in good
carbide in sufficient proportion to render the acetylene itself
inflammable. According to Caro the silicon may be present both as
hydrogen silicide and as silicon "compounds." A high temperature in the
generator will favour the production of the latter; an apparatus in which
the gas is washed well in lime-water will remove the bulk of the former.
Fraenkel has found that magnesium silicide is not decomposed by water or
an alkaline solution, but that dilute hydrochloric acid acts upon it and
spontaneously inflammable hydrogen silicide results. If it may be assumed
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account