An ingenious friend has favoured us with the following explanation of the manner in which electrics are excited, which to us is more satisfactory than any other we have seen. “In order that electricity may be accumulated in greater quantity in one body than in the surrounding ones, it must be set in motion. This may be effected by the _rubbing of electrics_; the _juxta-position_ of non-electrics of different conducting powers; and by the _chemical action_ of many, if not all bodies on each other. The rubber will act on the first principle, and the more perfect the contact between it and the electric the greater will be the effect. The chalk, whiting, amalgam &c. while they will, if properly prepared, make the contact more perfect, will also be of service on the second principle; and the amalgam will besides be of use on the third. Mercury and zinc may be exposed separately to the air without any alteration; but when combined they readily unite with the oxygen of the atmosphere; especially when the surface of contact is frequently renewed, and the temperature increased by friction. “The glass, acquiring a different state of electricity from the rubber, will, as each portion passes from under it, carry away and impart to the prime conductor the excess which it has obtained; and this the more certainly if the dissipation of the electricity be prevented, or the accumulation increased, by a piece of silk connected with the rubber.—The chain making the communication between the rubber and the adjoining non-electrics will enable this process to go on; and perhaps may also assist on the second principle.” With respect to the engine which is to give motion to the electric, it has been customary, simply to turn the globe or cylinder with a winch; but this will not produce the greatest power of which the glass is capable. To effect this it should be made to turn six or seven times in a second, which is more than can conveniently be done with the winch only; and therefore multiplying wheels are used with advantage.