The prime or first conductor is an insulated non-electric substance, furnished with a number of points on the end towards the electric, in order to collect the electricity from it. It is usually made cylindrical, but whatever be its form it should always be perfectly free from points or sharp edges, except the points toward the electric already mentioned; and if holes are made in it, which on many accounts are very convenient, they should be well rounded and perfectly smooth.—The larger this conductor is, if not disproportionate to the cylinder or globe, the stronger and more dense will be the electric spark, which will proceed from it when touched by a blunt conductor. There must however always be a certain proportion between the cylinder or globe and the prime conductor, for if the former be small and the latter large, the electricity will not be collected fast enough, to preserve an accumulation of it in the prime conductor, because a portion is always taken off by the air, in proportion to the surface presented to it by the conductor. We shall now give a short connected explanation of the whole machine, a draft of which is exhibited in the frontispiece. AB and CD are two pillars of baked wood well varnished, perpendicularly raised from the top of the table EFGH—these serve to support the cylinder I, by the axles of the caps KK; from one of these proceeds the long axle L, which passes through a hole in the pillar CD, having the pulley M, fixed on its square end. N is a multiplying wheel, around which the band or strap O passes, and likewise around the pulley M.—The wheel N should be made moveable with respect to the pulley M, to accommodate the stretching of the band, or else the pulley should have a number of grooves of different radii in its circumference. The rubber R, is fastened to a pillar of glass, or baked wood P. The pressure of the rubber may be augmented at pleasure, by means of a sliding board and tightening screw. The prime conductor is represented by Q. It is insulated by the glass pillars SS, which support it. T represents the points which collect the electricity from the cylinder. Cylinders and globes made for electrical machines are not always to be procured. Their place however, may be very well supplied by the large show bottles of the apothecaries. When these are used, one of the caps, instead of being concave (to receive the neck of the cylinder) must be made convex—so as to fit the hollow in the bottom of the bottle.—It is to be fastened with the cement used in the other machine. The most powerful electrical machine ever constructed, was at Teyler’s museum at Haarlem. It had, instead of the cylinder or globe as in the common machines, two circular plates of glass, which were made to turn upon the same horizontal axis. These plates were excited by eight rubbers, which acted on their surfaces. In this machine the prime conductor had branches which collected the electricity from between the plates.