Sulphurous acid is itself, of course, a gas, and whilst the gas itself has been used for treating the material (_e.g._ bones), it has been found not only more convenient but also more effective to use an aqueous solution. This is mainly because it is possible to attain a greater adsorption in a liquor. Unfortunately, however, sulphurous acid is not a very soluble gas, and although 8-10 per cent. solutions may be, with great care, obtained, they are really supersaturated and readily yield the gas, even with slight mechanical agitation. Solutions even of 2 to 3 per cent. strength are also liable to this, and the general experience is that 1 to 2 per cent. solutions are most economical and convenient for practical purposes. As the freight on weak solutions is prohibitive, the manufacturer using sulphurous acid is faced with the necessity either of purchasing cylinders of sulphur dioxide liquefied by pressure or making the gas and solution himself. The former is the most convenient course when only small amounts are required, but the latter preferable for a gelatine factory of any size. Sulphurous acid is easily manufactured by burning sulphur and leading the fumes by induced draught up a scrubber down which water slowly trickles. Forced draught may also be used, as in the Sachsenburg plant. Of the other reducing agents which have been used, sodium hydrosulphite (Na{2}SO{2}) deserves mention. It is a very powerful reducing agent, and has been found most useful when employed as an assistant to sulphurous acid. This reagent is usually added to the sol, after evaporation and before gelation. It is sold as a white powder, usually under trade names. Sometimes a mixture of bisulphite and powdered zinc replaces it, but this is objectionable for pure food gelatines. Its use also involves an impurity in the finished article, and a greater amount of "inorganic ash."