=The Beam House Work= consists in the mechanical removal of those parts of the hide not wanted for leather manufacture. _Unhairing_ removes the hair and the epidermis made loose in liming. The hides are placed over a sloping "beam" with a convex surface, and the hair scraped off with a blunt concave and double-handled knife. The hides are then thrown into a pit of water. The hair is carefully collected, washed well with water, preferably centrifuged, and then dried out by a current of warm air. It forms a valuable bye-product. White hair is usually kept separate and fetches a higher price. _Fleshing_ is the next process. The hides are again placed over a beam, with the flesh side (_i.e._ the side nearest the flesh) uppermost. Skilled workmen then cut off, with a sharp convex knife, the fat, flesh and connective tissue left in flaying. _Rounding_ is usually the next process. The unhaired and fleshed hide is spread out flat and cut up into butt, shoulder and a pair of bellies. These parts have different commercial values, and may afterwards be tanned by different methods for very different purposes--for dressing leather, and sometimes even for sole leather. _Scudding_ is the last piece of beam work. The fleshed hides (whether rounded or not) are washed, or at least rinsed, with water, and again placed on the beam grain side up. They are then scraped with a rather sharp concave knife, to remove "scud," which consists of hair roots and sheaths, lime soaps, fat, pigment and other dirt. Short hair is shaved off by a very sharp hand knife. The beam work demands a certain amount of skill from the workmen, especially from the flesher, whose sharp knife may prove very wasteful in incompetent hands. Hand labour was slowly but surely being replaced by machinery before the war, and war-time conditions have greatly accelerated the rate of transition. Beam house machinery is rapidly becoming universal. The machines are cumbrous and expensive in cost and in power, but machine work is quicker, less laborious, and needs much fewer workmen. Many types of machine have been suggested, but the most useful are those in which the hides pass over rollers and are simultaneously acted upon by a rapidly revolving cylindrical knife with spiral blades, one half being a left-handed and the other a right-handed spiral, so that the hide is scraped outwards as well as in the direction of motion. The part of the hide being acted upon rests on a pneumatic roller. By changing the type of spiral knife cylinder the machine will unhair, flesh or scud.