The introduction of the vacuum vessel by Dewar has been of great service in all the work on liquefied gases. A vacuum vessel is a double-walled glass vessel, as shown in Fig. 1, G. The space between the inner and outer walls of the vessel is exhausted by means of an air pump before it is closed. The vessel is therefore surrounded by a vacuum. As heat is not conducted by a vacuum, it is possible to keep specimens of liquefied gases in such vessels for a surprisingly long time. Heat enough can not pass through the vacuum to vaporize the liquid rapidly. The most common form of these vessels is that of a globe. Such a vessel is known as a Dewar globe or bulb. It has been found that liquid air can be kept very well by putting it in a tin or galvanized iron vessel, which in turn is placed in a larger one, and then filling the space between the two with felt. Under these conditions vaporization takes place quite slowly, and it is possible to transport the liquid comparatively long distances. It has, for example, been transported from New York to Baltimore and Washington. In one case with which the writer is familiar two cans were taken from Mr. Tripler's laboratory in the morning, delivered at the Johns Hopkins University in the afternoon, and used to illustrate a lecture in the evening. After the lecture there was enough left for certain experiments that were carried on during the rest of the night. [Illustration: FIG. 2.--DIAGRAM SHOWING WORKING OF COMPRESSION APPARATUS FOR MAKING LIQUID AIR.]