Discoveries and Inventions of the Nineteenth CenturyRoutledge, Robert
History
Discoveries and Inventions of the Nineteenth Century
Routledge, Robert
Inventions -- History -- 19th century
tons, perhaps about fifty times as much as it was a century before, and
thirty years later (1860) it had risen to nearly 4,000,000 tons. These
figures show the extraordinary expansion of the British iron manufacture
in the earlier part of the century; and the still more extensive
applications of iron during the next twenty years had the effect of
almost doubling the produce in 1880, and of increasing also three-fold
the amount of foreign metal imported, raising it to 2,500,000 tons. The
reader will now, it is hoped, be prepared to follow with some interest a
brief account of the principal inventions which have brought about
results of such importance.
[Illustration:
FIG. 17.—_Blast Furnace (Obsolete Type)._
]
[Illustration:
FIG. 18.—_Section and Plan of Blast Furnace (Obsolete Type)._
]
Deferring for the moment any description of the latest blast furnaces,
we invite his attention to Fig. 17, which represents the furnace used in
the first half of our century, but which now is of an obsolete type,
Fig. 18 being the section and plan of the same. The lower part of Fig.
17 shows where the molten metal has been allowed to run out of the
furnace into channels made in dry sand; first a main stream, then
branches to right and left, each of these with smaller offsets on each
side of it. These smaller channels are the moulds for the _pigs_, so
called because of the fancied resemblance of their position with regard
to the branch that supplied them, to the litter of a sow. They are
easily broken off from the larger mass, and then form pieces about 3 ft.
long with a ᗜ-shaped section, 4 in. wide, the weight being from 60 to 80
lbs. This is iron of the crudest kind, and though it is often referred
to as “cast iron,” it is, as a matter of fact, not used in this state
for any castings, except those of the very roughest and largest kind: a
certain amount of purification is requisite in most cases. This is given
by fusing the metal—along with some form of oxide and often other
matters—in a _cupola furnace_, which is like a small blast furnace,
being from 8 ft. to 20 ft. high and uses coke for fuel with a cold
blast.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account