The yarn is generally the same quality and size for both warp and filling, and is usually a soft spun 2-20s. The side of rubber is generally about 38 or 40, with 40 picks per inch and a finished stretch of 100 per cent. The use such webs are put to, necessitating as we have already said a soft and sluggish stretch, prevents the use of a heavy rubber thread, the result being that when the bandage is kept in close contact with the warm body, the life of the fine rubber is of short duration. This condition, and the open weave necessary to get the easy stretch, have made it expedient to use in many of these goods strands of rubber which have been covered with cotton threads before weaving. This process not only prolongs the life of the web, but allows for even more open weaving, the use of different weaves than would be possible where the uncovered rubber thread is used, and the production of a fabric more suitable for the purpose. In order to get the soft easy stretch which is the most desirable characteristic of a bandage web, and yet have the necessary width, it is not unusual to introduce a seersucker effect, as shown in Fig. 4, in sections of the web so as to reduce the strong elasticity of the whole. In an ordinary cotton cloth the seersucker or crinkle effect is usually produced by the use of a separate warp of heavier yarn than the rest of the fabric, which warp must be weighted differently and often a different weave is employed to emphasize the contrast in the puckered seersucker effect. In the elastic web all this special preparation is unnecessary. Wherever the seersucker stripe is desired, strands of rubber are left out which of course takes away from these portions that element which contracts the other part of the web, and a seersucker effect is the result. Such stripes are often used for the ornamentation of some webs by having narrow sections introduced for border effects, or running down the center, and in fact they may be employed in a variety of ways, inasmuch as they lend themselves effectively to different forms of coloring, in relief to the main fabric. [Illustration: Fig. 4.—Seersucker Effect] [Illustration: Fig. 5.—Frill Web Made on Cam Loom] [Illustration: Fig. 6.—Plain Web] [Illustration: Fig. 6A.—Harness Draft and Weave for Fig. 6, Simplest Form of Double Cloth] In passing it might be well to note that where it is necessary to use covered rubber threads special arrangements are required for making the warps, as the covered thread cannot be handled like the ordinary thread. The spools are placed in a rack which is required for each warp. Arrangements have been made so that to each spool is attached a special head, which can be weighted either by a lever brake or weight attached to a cord running in a groove on the auxiliary head. By this arrangement uniform delivery of the threads can be made to the warp beam so as to avoid any puckering caused by irregular warping. FRILL WEB ON CAM LOOM