The most simple distilling vessel is a species of bottle or matrass, A, Pl. III. Fig. 8. which has been bent from its original form BC to BD, and which is then called a retort; when used, it is placed either in a reverberatory furnace, Pl. XIII. Fig. 2. or in a sand bath under a dome of baked earth, Pl. III. Fig. 1. To receive and condense the products, we adapt a recipient, E, Pl. III. Fig. 9. which is luted to the retort. Sometimes, more especially in pharmaceutical operations, the glass or stone ware cucurbit, A, with its capital B, Pl. III. Fig. 12, or the glass alembic and capital, Fig. 13. of one piece, is employed. This latter is managed by means of a tubulated opening T, fitted with a ground stopper of cristal; the capital, both of the cucurbit and alembic, has a furrow or trench, r r, intended for conveying the condensed liquor into the beak RS, by which it runs out. As, in almost all distillations, expansive vapours are produced, which might burst the vessels employed, we are under the necessity of having a small hole, T, Fig. 9. in the balloon or recipient, through which these may find vent; hence, in this way of distilling, all the products which are permanently aeriform are entirely lost, and even such as difficultly lose that state have not sufficient space to condense in the balloon: This apparatus is not, therefore, proper for experiments of investigation, and can only be admitted in the ordinary operations of the laboratory or in pharmacy. In the article appropriated for compound distillation, I shall explain the various methods which have been contrived for preserving the whole products from bodies in this process.