=Light Gun Discussion.= The consensus of opinion of all artillery officers—French, English and American—is that the 75-mm gun, or approximately this caliber, firing a 15-pound projectile or a projectile of approximately this weight, and having a range of not less than 11,000 yards, is a satisfactory weapon at the present time for use with the division artillery. The projectile in question, whether a shrapnel or a high explosive shell, satisfies adequately the criterion of man-killing. At the close of the war the nations were not entirely in accord with respect to their conception of an up-to-date carriage for a light field gun. All the nations whose tendencies have been considered in this report have experienced to a varying degree with field gun carriages, particularly in a desire to design a carriage permitting a greater angle of elevation and greater movement of the gun in the traverse. The Italians have expressed themselves in the modified Deport Carriage; this vehicle is of the split trail type and permits an elevation in excess of 75 degrees, and a traverse on each side of the center of the carriage of about 20 degrees—about 356 mils. Up to the time that the board left France it was not possible to learn the French decision in the matter of a split trail carriage for their light field gun. It is known, however, that several types of this carriage have been designed and tested; it is known, also, that considerable favor has been found with the American 1916, which type has been tested under the auspices of the French Government. In England, however, the board was not able to develop any enthusiasm for the split trail type, although the matter had been seriously considered. In that country the up-to-date field gun carriage appears to be adequately expressed in their new 18-pounder. The vehicle upon which this gun is mounted permits an elevation of 37 degrees and an axle traverse of 4½ degrees on each side. The trail is a box trail and the carriage is simple and steady in its construction and lends itself to rapid production.