Lead Smelting and Refining, With Some Notes on Lead Mining
Science
Lead Smelting and Refining, With Some Notes on Lead Mining
Lead -- Metallurgy; Lead mines and mining
The lead occurs as irregular granules of galena scattered through the
limestone in essentially horizontal bodies that vary from 5 to 100
ft. in thickness, from 25 to 500 ft. in width, and have exceeded 9000
ft. in length. There is no vein structure, no crushing or brecciation
of the inclosing rock, yet these orebodies have well defined axes or
courses, and remarkable reliability and persistency. It is true that
the limestone is usually darker, more porous, and more apt to have thin
seams of very dark (organic) shales where it is ore-bearing than in the
surrounding barren ground. The orebodies, however, fade out gradually,
with no sharp line between the pay-rock and the non-paying, and the
lead is rarely, if ever, entirely absent in any extent of the limestone
of the region. While the main course of the orebodies seems to be
intimately connected with the axes of the gentle anticlinal folds,
numerous cross-runs of ore that are associated with slight faults are
almost as important as the main shoots, and have been followed for
5000 ft. in length. These cross-runs are sometimes richer than the
main runs, at least near the intersections, but they are narrower, and
partake more of the type of vertical shoots, as distinguished from the
horizontal sheet-form.
Most of the orebodies occur at, or close to, the base of the limestone,
and frequently in the transition rock between the underlying sandstone
and the limestone, though some notable and important bodies have
been found from 100 to 200 ft. above the sandstone. This makes the
working depth from the surface vary from 150 to 250 ft., for the upper
orebodies, to 300 to 500 ft. deep to the main or basal orebodies,
according as erosion has removed the ore-bearing limestone. The
thickness of the latter ranges from 400 to 500 ft.
Associated with the galena are less amounts of pyrite, which especially
fringes the orebodies, and very small quantities of chalcopyrite, zinc
blende, and siegenite (the double sulphide of nickel and cobalt).
Calcite also occurs, especially where recent leaching has opened
vugs, caves, or channels in the limestone, when secondary enrichment
frequently incrusts these openings with crystals of calcite and galena.
No barite ever occurs with the disseminated ore, though it is the
principal gangue mineral in the upper or Potosi member of the third
magnesian limestone, and is never absent in the small ore occurrences
in the still higher second magnesian limestone.
While the average tenor of the ore is low, the yield being from 3 to
4 per cent. in pig lead, they are so persistent and easy to mine that
the district today is producing about 70,000 tons of pig lead annually,
and at a very satisfactory profit. As the output was about 2500 tons
lead in 1873, approximately 8500 tons in 1883, and about 20,000 tons in
1893, it shows that this district is young, for the principal growth
has been within the last five years.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account