We have been more minute in the description of Bell's machine, because it may have been the foundation of some of the early, and nearly simultaneous attempts made in this country. In fact it does not admit of doubt that several were nearly identical with Bell's in the use of the shears and reel, though with much more simple gearing, and in the general arrangement. Whether they were original inventions, cannot be ascertained. In this country, from 1800 to 1833 out of some 15 or 20 patents granted for "cutting grain" and "cutting grass," only four appear to have been "restored"; i.e. technically speaking, "not restored" in models and drawings after the burning of the Patent Office in 1836. Many, if not most of them, were probably improvements in the grain cradle, and mowing scythe; though the names are preserved, there is no record to show for what particulars the patents were granted. There can be no doubt, however, that the inventors considered them valueless, as they were "not restored," though Congress voted large sums to replace the burnt models and drawings, without any expense to the parties. Of those restored James Ten Eyck's patent is dated 1825, Wm. Manning's in 1831, Wm. & Thos. Schnebly's in 1833, and Obed Hussey's also in 1833. James Ten Eyck used an open reel; not only to gather the grain, but his cutters or shears, were attached to, and revolved with the reel;--very much, if not exactly on the principle of shearing cloth. William Manning used another form of cutters, and quite different from James Ten Eyck's--he likewise used fingers or teeth to support the grain during the action of the horizontal cutters. William and Thomas Schnebly of Maryland also used the reel, with shears as cutters, very similar to Bell's. Abraham Randall, or Rundell, of New York (for the name is spelled both ways), was another of the early inventors. His patent of 1835 is not restored, though it is stated his machine was experimented with as early as 1833 or 1834. He also used the reel, and his cutters, it is said, were similar to Bell's--using shears. T. D. Burrall, of New York, was also one of the early inventors, about 1832 or 1833, but we believe professedly after Bell's, so far as to use a reel and shears. [Sidenote: None Successful] [Sidenote: Hussey's Machine an American Triumph]