It is well known that we have in electricity a most powerful agent by which to effect the chemical combination of various substances on the one hand, or on the other, by its means to break up and disrupt a chemical compound. Professor Gardner’s main principle of action in his new process is founded upon these facts, and he takes advantage of electrical power to cause the combination of the lead with the necessary elements to build up white lead in his chambers. He either employs electrical discharges to energise and render active in their chemical affinities the various materials engaged, or he so disposes of them as to form an electric or galvanic combination in the chamber. In the latter arrangement the chamber and its contents represent a gas battery on an extensive scale. In practice he prefers the latter plan; it is more simple, more manageable in the hands of the ordinary workmen. The original plan was to have graphite or graphitic carbon plates or supports for the buckles or gratings of lead within the converting chamber. These carbon plates and the lead to be converted, were so placed as to form a collection of galvanic “couples” or “pairs,” and in this condition were submitted to the gases entering the chamber from without. It will be understood that various modes of arrangement would occur without departing from the principle concerned. In practice this method answered very well, but presently a difficulty arose; not only were the graphitic carbon or graphitic plates expensive, but they were easily broken, and became friable in use. Carbon plates of an especial kind were manufactured to meet these failures and remedy these defects, not without success, but still open to objection. In looking round for some substitute to replace the carbon, two points were to be kept in view, to seek some electro-negative to lead like the carbon, and some electro-conductive like it, and some material that would bear rough handling such as workmen give, and be practically convenient in its adaptation to a working chamber. Gold or platinum would excel in these particulars, but there are considerations which debar their use. Pure tin presented itself, and tin was tried with great success. Tin would at first be thought, on account of its close electrical relationship to lead, far from favourable to the purpose. Graphite or carbon would appear far more suitable. Practice pronounced the tin to act as efficiently as carbon. This may at first seem contradictory and strange, but if we consider that while the carbon is certainly more highly electro-negative to lead than tin, yet the tin is the more conductive, and offers the less resistance to the electric current of the two; in this manner the tin compensates by its conductive power all it may lack, as compared with carbon, in electrical energy when coupled up with lead.