To return to our raw materials, which we may now suppose to be weighed out in a dry state in the required proportions. These are once more thoroughly mixed with water to form the slip or _barbotine_, which is again passed through a fine sieve. To remove any particles of iron which may have come from the machinery or elsewhere, and which if allowed to remain would form unsightly stains on the finished ware, it is usual to pass the slip at this stage through a vessel in which a number of horse-shoe magnets are suspended. In some of the large French factories a more complicated machine is used for this purpose. The superfluous water has now to be removed either by evaporation or by pressure between canvas bags in the manner described above. The paste may then be passed through a pug-mill to render it uniform in consistency. A curious question arises with regard to the prepared clay. There was formerly a widespread idea, which may contain an element of truth, that instead of handing the clay at once to the potter, it should be kept, under certain conditions, for a long space of time that it may undergo a process of ‘aging’ and fermentation. By the ‘aging,’ the working qualities, especially of a ‘short’ or non-plastic paste (such as that in use at Sèvres in the eighteenth century, in making the _pâte tendre_), were doubtless increased, the more so when the clay was at intervals subjected to fresh kneading and watering. With regard to the long periods for which the clay was kept by the Chinese, the most exaggerated statements were formerly made. Mr. William Burton is of opinion that there may be in some cases an evolution of carbonic acid and sulphuretted hydrogen when natural plastic clays are used, for these may contain both vegetable remains and small quantities of iron pyrites. But the change, he thinks, is chiefly a physical one, due to the settling down of the mass. Might there not also, I would suggest, be a change of a more intimate nature, due to the formation of gelatinous silica and perhaps also of fresh alkaline or other silicates, among these minutely comminuted particles of various materials now freshly brought together? We know very little of the conditions that give to natural clays their peculiar unctuous quality and their plasticity. We come now to what has been called the ‘shaping’ of the clay, using that word as an equivalent to the French _façonnage_ to include all the processes, throwing on the wheel, turning of the lathe, ‘pressing’ and ‘casting,’ by which the desired form is given to the vessel.