The POTTER’S WHEEL, perhaps the most ancient of all mechanical contrivances, is still largely used in the shaping of porcelain, and that, too, in a simple form which differs little from that employed three or four thousand years ago in Egypt,[10] and perhaps for nearly as long a period in China. From an æsthetic standpoint, the wheel holds the same relation to the art of the potter as the brush does to that of the painter. It is perhaps a just cause of reproach against that branch of the ceramic art with which we are now concerned, that so comparatively little use is made of the potter’s wheel. Not only in Europe, but for long ages in China also, the use of the wheel, for many classes of vessels, has been replaced by various processes of moulding. With us, but not in the East, a third process, that of ‘casting’ with liquid slip, is largely used. But when made either by casting or moulding, the hand of the potter is not seen in the shape of the finished vessel. By means of the wheel alone do we get the full expression of the peculiar qualities of a plastic material. This was recognised by the Greeks, when the potter who made the vase signed his name by the side of the painter who decorated it. This it is that gives a certain charm to the roughest earthenware which we may look for in vain in the most elaborately decorated specimen of either Chinese or European porcelain. The clay as it comes from the filter-presses or from the drying-beds is subjected to a series of kneading processes to ensure uniformity of texture. The last of these is the ‘slapping,’ when the clay is made up into hollow balls, and thrown vigorously on to a board until all bubbles and irregularities of texture are removed.