The materials that enter into the glaze are reduced to the finest powder in mills similar to those in which the china-stone and flint are ground for the preparation of the paste. If any substance soluble in water, such as borax or salts of the alkalis, enter into the composition of the glaze, these must be first partially fused in combination with the other materials to form a _frit_, a kind of imperfect glass. These frits, which enter so largely into the composition of soft-paste porcelain, are formed with the object of bringing the soluble constituents into an insoluble form before mixing with water to form the slip. There are indeed other practical reasons that render a preliminary partial fusion desirable. The finely ground elements of the glaze, mixed in due proportion, are worked up with water to form a creamlike slip into which the vessel to be glazed is now dipped. In China, in many cases, the glaze-slip is blown upon the surface in the form of a spray. This is done by means of a bamboo tube, covered at one end by a piece of silk gauze, through which the liquid is projected by the breath of the operator (French, _insufflation_); in other cases the glaze may be painted on with a brush. In China, as we have mentioned, the glaze-slip is generally applied to the raw surface of the thoroughly dried but unbaked ware, but in other countries there is, almost without exception, a preliminary firing of greater or less degree to produce a biscuit. We shall restrict the use of the word glaze to the vitreous coating applied directly to the surface of the raw paste or of the biscuit to enhance the decorative effect of the ware, and with the more prosaic object of allowing the surface to be easily kept clean. In the case of porcelain this coating is always more or less transparent.[16] There is here no necessity for concealing the natural white colour of the paste. In the case of many kinds of pottery, however, as in the ‘enamelled fayence’ of Delft and Italy, the glaze is rendered opaque by the addition of oxide of tin, so that the ill-favoured ground is concealed by a white shiny surface which may be made to resemble closely the natural surface of porcelain. A glaze of this kind is often called an enamel, but as we are not concerned with such an expedient we shall confine the use of that word to the various forms in which a vitreous decoration, whether translucent or opaque, is _superimposed upon the glaze_ and fused into it, more or less thoroughly, by a subsequent firing in a muffle furnace.