=37. Estimation of Iron and Alumina in Phosphates by Crispo’s Method.=—The phosphate of ferric iron is subject to a slight decomposition in presence of both hot and cold water with a tendency to the production of basic compounds. It is soluble to a slight extent in hot and cold acetic acid, almost insoluble in ammonium acetate, and quite insoluble in ammonium chlorid and nitrate. Aluminum phosphate is likewise soluble, to a slight degree, in acetic acid and ammonium acetate, and insoluble in ammonium chlorid and nitrate. The method of Crispo for the separation of iron and alumina in phosphates is based on the above properties.[27] Five grams of the mineral phosphate are dissolved in fifty cubic centimeters of aqua regia, composed of forty cubic centimeters of hydrochloric acid of 1.10, and ten of nitric acid of 1.20 specific gravity, and this solution is diluted to half a liter. To fifty cubic centimeters of the filtered solution are added two of ammonia (0.96) and fifty of a half saturated solution of ammonium chlorid, and the whole boiled. The liquid should remain clear, but if it become cloudy add a little dilute nitric acid, drop by drop, until the turbidity is removed, and then ten cubic centimeters of a saturated solution of ammonium acetate, and boil for three minutes, cool, and filter. The precipitate is washed twice with a ten per cent solution of ammonium chlorid and redissolved with two cubic centimeters of nitric acid, and the filter washed with hot water. The phosphoric acid is separated by forty cubic centimeters of molybdate solution, and the precipitate washed three or four times with a one per cent nitric acid solution. To the filtrate are added fifty cubic centimeters of a one-half saturated ammonium chlorid solution, ammonia is added in slight excess to produce precipitation and the mixture boiled for a few minutes. After filtering, the precipitate is washed with hot water three or four times, dissolved in two cubic centimeters of nitric acid, and the filter washed with hot water. Again, fifty cubic centimeters of half saturated ammonium chlorid are added and the precipitate thrown down once more by ammonia in slight excess. The precipitate is washed with hot water and finally ignited and weighed as iron and aluminum oxids.