=The Leeds-Northrup Recorder.=—The Leeds and Northrup Company, of Philadelphia, manufacture a recorder which is largely used in the United States. As in Paul’s recorder, all the mechanism is motor driven; but the other arrangements are entirely distinct. Instead of measuring the deflection of the pointer, a zero deflection method is used. The pyrometer forms part of a potentiometer circuit, and the function of the mechanism is to oppose an E.M.F. equal to that of the pyrometer, from which the temperature is known. This has the advantage that the measurement is independent of the resistance of the leads, and is capable of great accuracy. The manner in which the adjustment of the opposing E.M.F. is controlled may be understood from fig. 26, in which the galvanometer coil is shown at the top of the figure. The shaft from the motor carries four cams, B, C, D, D, and at each revolution the cam B raises the bar (5) so as to press it against an arm attached to the galvanometer coil. At the same moment the cam C pushes against the bar (3), and thereby releases a clutch (2) from the disc beneath. As shown, the boom from the coil is to the right of the central position, and is gripped between a bar (5) and the lever (4) when the former rises, causing an angular movement of the clutch-arm (2). As the rotation continues the cam C leaves the bar (3), which then springs back and engages the clutch on the disc. The cam D then descends and presses on the projection of the clutch-arm to the left, causing the disc to rotate. The movement of the disc is conveyed to an arm which moves over the slide wire of the potentiometer; and this movement continues until the galvanometer boom is in the central or zero position, when neither of the levers 4, 4 is gripped, and consequently the disc is not fed in either direction. If the boom swing to the left, the movement of the disc will evidently be in the converse direction to that described. In this recorder considerable power is available to drive printing or other mechanisms. The arm moving over the potentiometer wire carries a pen which marks the moving chart, or, when several records are taken simultaneously, a stamping machine is used which impresses the number of the pyrometer on the chart. The same galvanometer mechanism serves also for use with resistance pyrometers, as will be explained later.