It seems probable that the activity communicated to inactive matter by precipitation from an active solution occurs only during the precipitation. The correctness of this view could readily be tested by observing whether the time that the inactive substance is present in solution has any effect on the magnitude of the activity imparted to it. When it is remembered that in pitchblende there are present the radio-elements uranium, thorium, radium and actinium and their numerous family of products, it is not surprising that many of the inactive substances separated from it may show very considerable activity due to the mixture of products which may be removed with them. In carrying out experiments on the separation of radium from pitchblende, M. and Mme Curie observed that the separation of the active substance is fairly complete if the stage of purification is not far advanced. Copper, antimony and arsenic can be separated only slightly active, but other substances like lead and iron always show activity. When the stage of precipitation is more advanced, every substance separated from the active solution shows activity. One of the earliest observations in this direction was made by Debierne, who found that barium could be made active by solution with actinium. The active barium removed from the actinium still preserved its activity after chemical treatment, and, in this way, barium chloride was obtained whose activity was 6000 times that of uranium. Although the activity of the barium chloride could be concentrated in the same way as the activity of radiferous barium chloride, it did not show any of the spectroscopic lines of radium, and could not have been due to the admixture of that element with the barium. The activity of the barium was not permanent, and Debierne states that the activity fell to about one-third of its value in three months. It seems probable that the precipitated barium carried down with it the product actinium X, and also some of the actinium itself, and that the decay observed was due to the transformation of actinium X. It is interesting to note that barium is capable of removing a large number of products of the different radio-elements. This effect is probably connected with its position in the electro-chemical series, for barium is highly electro-positive. Giesel showed in 1900 that bismuth could be made active by placing it in a radium solution, and considered that polonium was in reality bismuth made active by the process of induction. In later experiments, he found that the bismuth plate gave out only α rays, and that the activity of the bismuth could not be ascribed to radium, since no β rays were present. We have seen that this activity of the bismuth is due to the product radium F deposited on its surface.