_The Schumann-Gruson Chilled Iron Cupola_.--This cupola (Fig. 9) is dome-shaped, and thus offers but little surface to direct fire; but it can be struck by a vertical shot, and it may be inquired whether its top can withstand the shock of projectiles from a 10 inch rifled mortar. It is designed for two 6 inch guns placed parallel. Its internal diameter is 19½ feet, and the dome is 8 inches in thickness and has a radius of 16½ feet. It rests upon a pivot, p, around which it revolves through the intermedium of rollers placed in a circle, r. The dome is of relatively small bulk--a bad feature as regards resistance to shock. To obviate this difficulty, the inventor partitions it internally in such a way as to leave only sufficient space to maneuver the guns. The partitions consist of iron plate boxes filled with concrete. The form of the dome has one inconvenience, viz., the embrasure in it is necessarily very oblique, and offers quite an elongated ellipse to blows, and the edges of the bevel upon a portion of the circumference are not strong enough. In order to close the embrasure as tightly as possible, the gun is surrounded with a ring provided with trunnions that enter the sides of the embrasure. The motion of the piece necessary to aim it vertically is effected around this axis of rotation. The weight of the gun is balanced by a system of counterpoises and the chains, l, and the breech terminates in a hollow screw, f, and a nut, g, held between two directing sectors, h. The cupola is revolved by simply acting upon the rollers. [Illustration: FIG. 9.--THE SCHUMANN-GRUSON CUPOLA.] _Mougin's Rolled Iron Cupola_.--The general form of this cupola (Fig. 1) is that of a cylindrical turret. It is 12¾ feet in diameter, and rises 3¼ feet above the top of the glacis. It has an advantage over the one just described in possessing more internal space, without having so large a diameter; and, as the embrasures are at right angles with the sides, the plates are less weakened. The turret consists of three plates assembled by slit and tongue joints, and rests upon a ring of strong iron plate strengthened by angle irons. Vertical partitions under the cheeks of the gun carriages serve as cross braces, and are connected with each other upon the table of the hydraulic pivot around which the entire affair revolves. This pivot terminates in a plunger that enters a strong steel press-cylinder embedded in the masonry of the lower concrete vault. The iron plate ring carries wheels and rollers, through the intermedium of which the turret is revolved. The circular iron track over which these move is independent of the outer armor.