The object of this invention, which has been patented by Mr. Geo. W. Jaques, of Burton, O., is to provide a plasterer's hawk in which the board on which the mortar is received, and which is subjected to expansion and contraction due to alternate moistening and drying, may be rendered light and rigid and, at the same time, be free to expand and contract without warping or cracking. In the center of the board is secured a bolt, upon which is received a handle having a nut in its outer end fitting the end of the bolt. A circular concave plate is placed on the bolt, between the handle and board, with its concave side toward the board. Between the plate and board is held an elastic rubber washer, which is compressed by screwing the handle down. The plate has a plane edge, which is secured to the board by screws, and in the edge are four notches for receiving the ends of wire frames that extend a short distance under the plate, by which they are clamped to the board. Each frame consists of a wire, bent to the shape shown in the upper view in the engraving. Through the end loops are passed screws, projecting from the board, and the center of each frame is secured to the board by a clip, the clips and bolt being arranged in a line parallel with the grain of the wood. The frames support the edges of the board, and the loops permit of the lateral movement of their screws and the portions of the board by which they are carried. This hawk weighs, even when thoroughly soaked, only one pound and a half, the old style weighing from three to five pounds. [Illustration: JAQUES' PLASTERER'S HAWK.] ADJUSTABLE WOOD MEASURING RACK.