The consumers of laundry soap have been educated to use a full boiled settled rosin soap and to make a good article at a price this method should be carried out, as it is the one most advisable to use. The composition of the fats entering into the soap depends upon the market price of these, and it is not advisable to keep to one formula in the manufacture of laundry soap, but rather to adjust the various fatty ingredients to obtain the desired results with the cheapest material that can be purchased. It is impossible to use a good grade of fats and make a profit upon laundry soap at the price at which it must be retailed. The manufacturer of this grade of soap must look to the by-product, glycerine, for his profit and he is fortunate indeed if he realizes the entire benefit of this and still produces a superior piece of laundry soap. SEMI-BOILED LAUNDRY SOAPS. It is advantageous at times to make a laundry soap by a method other than the full boiled settled soap procedure as previously outlined. This is especially the condition in making a naphtha soap, in which is incorporated naphtha, which is very volatile and some of the well known manufacturers of this class of soap have adopted this process entirely. A laundry soap containing rosin cannot be advantageously made by the cold process, as the soap thus made grains during saponification and drops a portion of the lye and filling materials. By making a semi-boiled soap this objection is overcome. The half boiled process differs from the cold process by uniting the fats and alkalis at a higher temperature. To carry out this process the following formulae have been found by experience to give satisfactory results. I. lbs. Tallow 100 Rosin 60 Soda Lye, 36deg. B. 80 II. Tallow 100 Rosin 60 Silicate of Soda 25 Soda Lye, 36deg. B. 85 III. Tallow 100 Rosin 100 Lye, 36deg. B. 105 Silicate of Soda 25 Sal Soda Solution 20 In any of these formulas the sodium silicate (40deg. B.) may be increased to the same proportion as the fats used. By so doing, however, twenty pounds of 36deg. B. lye must be added for every hundred pounds of silicate additional to that indicated or in other words, for every pound of silicate added 20 per cent. by weight of 36deg. B. lye must be put into the mixture. The rosin may also be replaced by a previously made rosin soap.