Soap-Making Manual: A Practical Handbook on the Raw Materials, Their Manipulation, Analysis and Control in the Modern Soap Plant.Thomssen, Edgar George
Science
Soap-Making Manual: A Practical Handbook on the Raw Materials, Their Manipulation, Analysis and Control in the Modern Soap Plant.
Thomssen, Edgar George
Soap
In some cases, especially when the lyes are very dirty and the total
residue in the crude glycerine runs high, for which there is a penalty
usually attached, a double filtration of the lye is advisable. This is
carried out by first making the lye slightly acid in reaction by the
addition of alum and acid, then filtering. This filtered lye is then
neutralized to the proper point with caustic, as already described, and
passed through the filter press again.
While in the method of treating the lyes as given sulfuric acid is used
for neutralizing, some operators prefer to use hydrochloric acid, as
this forms sodium chloride or common salt, whereas sulfuric acid forms
sodium sulfate, having 3/5 the graining power of salt, which eventually
renders the salt useless for graining the soap, as the percentage of
sodium sulfate increases in the salt. When the salt contains 25 per
cent. sodium sulfate it is advisable to throw it away. Sulfuric acid,
however, is considerably cheaper than hydrochloric and this more than
compensates the necessity of having to eventually reject the recovered
salt. It may here also be mentioned that recovered salt contains 5-7 per
cent. glycerine which should be washed out in the evaporator before it
is thrown away. The following tables give the approximate theoretical
amounts of acids of various strengths required to neutralize one pound
of caustic soda:
For 1 pound of caustic soda--
3.25 lbs. 18deg. B. hydrochloric (muriatic) acid are required.
2.92 " 20deg. B. " " " " "
2.58 " 22deg. B. " " " " "
For 1 pound of caustic soda--
1.93 lbs. 50deg. B. sulphuric acid are required.
1.54 " 60deg. B. " " " "
1.28 " 66deg. B. " " " "
It is, of course, feasible to neutralize the spent lye without first
determining the causticity by titrating a sample and this is often the
case. The operator under such conditions first adds the sulfate of
alumina, then the acid, using litmus paper as his indicator.
Comparatively, this method of treatment is much slower and not as
positive, as the amount of acid or alkali to be added is at all times
uncertain, for in the foaming of the lyes their action on litmus is
misleading.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account